Remote Hmi Shell; Installation; Configuring A New Station - ABB REG316 4 Series Operating Instructions Manual

REG 316*4 1MRB520049-Uen / Rev. E
The modem must be set to answer automatically when it re-
ceives a call.
Initialisation string for the remote modem:
Fixed DTE rate:
DTE async speed:
DTR ignored:
RTS ignored
DSR always on
Auto answer:
Handshake off:
Save modem settings: AT&W0.
5.12.3.

Remote HMI shell

The HMI shell requires an operating system Windows 3.xx, Win-
dows 95 or Windows NT 4.x. Menus guide the user through the
procedures for configuring stations and devices. The device HMI
is started in a DOS window.
5.12.3.1.

Installation

Place installation disc No. 1 in drive A and select 'Run' in the
'File' menu to start the installation.
Fig. 5.61
5.12.3.2.

Configuring a new station

After starting the remote HMI, select 'New station' in the 'File'
menu to open the dialogue for entering the station name.
&B1
9600 Baud
&D0
&R1
&S0
S0=2
&H0
Starting the installation of the HMI
ABB Switzerland Ltd
5-89