Vdew Bus; Rio Information; Resetting Scs Data - ABB REG316 4 Series Operating Instructions Manual

REG 316*4 1MRB520049-Uen / Rev. C
No. of transmission
fails
No. of lost incoming
messages
Delete MVB diag. info
Selecting this menu item resets the various diagnostic informa-
tion counters to zero.
Load MVB messages
Selecting this menu item displays the last message sent or
received and also the last event transmitted. These data are only
needed for development purposes and are not described in more
detail for that reason.
6.8.4.

VDEW bus

No special information is available for the VDEW bus.
6.9.

RIO information

Information is displayed on the status of the process bus and the
distributed input/output system. A detailed description of the data
is given in publication 1MRB520192-Uen.
6.10.

Resetting SCS data

After entering his password, an authorised user can delete the
SCS input data.
Number of errors while transmitting a message, for
example, because the buffer on the PC card was not
available.
Number of messages lost, because the driver
receive buffer was full.
ABB Switzerland Ltd
6-13