Configuring A Remote Hmi For Operation Via The Spa-Bus Interface; Remote Hmi Connected Directly To The Electro-Optical Converter - ABB REG316 4 Series Operating Instructions Manual

REG 316*4 1MRB520049-Uen / Rev. E
The following confirmation dialogue is displayed providing the
connection is established within the timeout period set on the
modem:
Fig. 5.70
After clicking on 'OK', the script window closes and the 'HMI'
menu becomes available.
You can now start the desired HMI.
Fig. 5.71
Select 'Disconnect' in the 'Connection' menu to close the link.
5.12.4. Configuring a remote HMI for operation via the SPA-BUS
interface
5.12.4.1. Remote HMI connected directly to the electro-optical con-
verter
COMT=SPA enables several devices to be controlled in an SPA-
BUS loop. A suitable electro-optical converter (SPA-ZC22) must
be inserted between the SPA-BUS loop and the PC.
Providing synchronisation is enabled, the clocks in the devices
are synchronised to the PC clock by a broadcast telegram when
the remote HMI is started.
Confirming the connection
Starting the HMI
ABB Switzerland Ltd
5-95