Table of Contents
Advertisement
REG 316*4 1MRB520049-Uen / Rev. E
5.8.
Diagnostics
The diagnostics menu includes the following:
· "Display diagnostic data"
The results of the self-monitoring function for the entire de-
vice, the main processor, the analogue input unit 316EA62
(where fitted) and the analogue inputs on the main processor
unit are displayed. The time when the settings were last
changed is also given.
The names and statuses of all the FUPLA logics loaded in the
device are also displayed.
· "Load HEX dump", "Delete HEX dump"
This information is only intended for development purposes.
· "IBB information"
Information concerning the status of the IBB link. The data
displayed depend on the type of bus protocol in use (LON,
VDEW, SPA or MVB).
· "RIO information"
Information concerning the status of the process bus and the
distributed input/output system (from V5.0).
· "Reset SCS data"
The SCS input data are deleted after entering a password
(from V4.04).
· "Load SCS forms"
Enables forms in a file created by the HMI documentation
function to be saved so that the signalling of events can be
controlled via the SCS (from V5.0).
Refer to
Section 6
for further details.
ABB Switzerland Ltd
5-75
Advertisement
Chapters
Table of Contents
