Adjusting The Display Contrast; Navigating In The Menu; Menu Structure - ABB RELION REL650 Operation Manual

1MRK 500 125-UEN A
IEC13000238 V1 EN-US
Figure 10: Selecting a submenu
3.
Enter the submenu with
4.
Browse the information with
4.1.6

Adjusting the display contrast

Adjust the display contrast anywhere in the menu structure to obtain optimal readability.
•
To increase the contrast, press simultaneously
•
To decrease the contrast, press simultaneously
Set the parameter
permanently change the display contrast.
4.1.7

Navigating in the menu

Navigate the menus and change the display views on the screen with the keypad.
•
To move to the Main menu or default view, press
•
To move up or down in a menu, press
•
To move downwards in the menu tree, press
•
To move upwards in the menu tree, press
•
To enter setting mode, press
•
To leave setting mode without saving, press
4.1.7.1

Menu structure

The Main menu contains main groups which are divided further into more detailed submenus.
Operation manual
.
The display contrast is not stored in any memory if changed using the keys
from local HMI. After an auxiliary power failure, the display contrast is restored
to set value for parameter
ContrastLevel via Main menu/Configuration/HMI/Screen/SCREEN:1 to
.
IEC13000238-1-en.vsdx
and .
and
and
ContrastLevel .
.
or .
.
.
.
Using the HMI
.
.
Section 4
AMU0600410 v7
AMU0600412 v7
AMU0600413 v10
21