Entering The Srio Address For 'Reporting - ABB REG316 4 Series Operating Instructions Manual

ABB Switzerland Ltd
· Level 5:
Press <Enter> to proceed to the Select module/part of unit
window and then the data input window Set Spacom slave
address. The default values in this window can be accepted.
ÉÍ Select Organization Í»
ºABB PoÉÍ Select Station Í»
ÈÍÍÍÍÍͺABB BaÉÍ Select Object/Bay Í»
ÈÍÍÍÍÍͺNTP-2 ÉÍÍÍÍÍÍÍÍ Select Unit ÍÍÍÍÍÍÍÍ»
ºNTP_2 ºREPORÉÍ Select Module/Part of Unit Í»SMS\DATA-EX\
ºReportÈÍÍÍÍͺREPORT STATION
ÈÍÍÍÍÍÍÍÍÍÍÍÍÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Organiz: ABB Power Automation Ltd
Station: ABB Baden
Obj/Bay: Report NTP
Unit: REPORT STATION
Mod/Part: REPORT STATION
C=Create communication parameters
E=Edit A=Add
Take care not to enter a device address in this window.
5.14.5.4.

Entering the SRIO address for 'Reporting'

· Select the menu item Select from the main menu and then
the Select object/bay window (Level 3). Now select the report
station.
ÉÍSelect OrganizationÍ»
º ABBÉÍSelect StationÍ»
ÈÍÍÍͺ ABBÉÍSelect Object/BayÍ»
ÈÍÍÍͺ NTP-2 REC316 45
º NTP_2 REC316 94
º Report NTP
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Organiz: ABB Power Automation Ltd
Station: ABB Baden
F3
MODEM
5-138
REG 316*4 1MRB520049-Uen / Rev. E
Configuration º
ÉÍ Setting SPACOM slave address ÍÍÍÍÍÍÍ»
º
º The module address is: 001
º
º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Configuration
Configuration
S=Show transducer file
D=Delete ESC=previous level
º
º
º
F5
PASSWORD
SMSBASE directory:
C:\SMS\BASE\
Appl. data directory:
New address: 001
ENTER=select
Enter
SELECT
º
º
º
º
Esc
EXIT