ABB Switzerland Ltd
5.12.3.3.
Establishing the connection to the station
Select the desired station via 'File' and 'Open station'.
Fig. 5.68
Depending on the communication parameter that has been set,
the HMI can be started either directly or, once the link has been
established, via the modem.
If the communication parameter is set to RDM or MDM, connec-
tion has to be established via the modem. The HMI menu is not
available (grey) until the link is in operation. After clicking on
'Connect' in the 'Connection' menu, a script window opens in
which the exchange of data between the modem and the remote
HMI is logged.
Fig. 5.69
5-94
REG 316*4 1MRB520049-Uen / Rev. E
Establishing the connection to the station
Script window