Loading Fupla - ABB REG316 4 Series Operating Instructions Manual

REG 316*4 1MRB520049-Uen / Rev. F
3.6.1.2.

Loading FUPLA

The FUPLA code has to be loaded again each time the FUPLA
configuration is changed. After making internal FUPLA changes
and copying the new versions of the files 'project1.bin' and
'project.cfg' to the FUPLA directory, select "Editor" from the main
menu and then 'RETURN' to load the new FUPLA code.
ÚMain Menu-----------¿
³
³ ÚEditor---------------------¿
³ ³
³ ³ Present Prot Funcs
³ ³ Edit Hardware Functions
³ ³ Edit System Parameters
³ ³ List Edit Parameters
³ ³ Save Parameters to File
³ ³ Load Parameters from File ³
À-³ RETURN
³
À---------------------------Ù
Fig. 3.6.1.4 Editor, Save ?
³
³
ÉÍÍÍÍÍÍÍÍÍÍ»
º SAVE ? º
º <Y>/<N> º
º º
ÈÍÍÍÍÍÍÍÍÍͼ
³
³
ABB Switzerland Ltd
3-299