Adding A New Function; General Information On Editing Parameters - ABB REG316 4 Series Operating Instructions Manual

ABB Switzerland Ltd
5.5.2.

Adding a new function

An additional function is added either by selecting the second
last menu item "Insert function" from the "Present prot. funcs."
menu
pressing <Enter>, a list of the available functions appears. Select
the desired function from the list and press <Enter> again. This
opens the "Edit function parameters" window
the parameters can be set. The procedure for the different kinds
of parameters is explained in
The last entry in the list of available functions is "No function".
Selecting this line and pressing <Enter> adds a "No function" line
to the list of active functions. This method can be used, for ex-
ample, to adjust the list so that a given function has the same
number in all the relays although.
5.5.3.

General information on editing parameters

There are two types of parameters, which have to be entered:
1. those requiring the entry of a numerical value, e.g. current or
voltage settings
2. those requesting selection from a list of alternatives, e.g. op-
tions or channels
Window used for both types of parameters:
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛABB Switzerland LtdÛÛÛÛÛÛÛÛÛÛÛÛExampleÛÛÛÛÛÛÛÛÛÛÛÛÛREG316*4 Generator TerminalÛ
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛÉEdit Function ParametersÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»Û
Ûº
Ûº Func Nr 2 - Voltage-DT
Ûº
Ûº ParSet4..1
Ûº Trip
Ûº Delay
Ûº V-Setting
Ûº MaxMin
Ûº NrOfPhases
Ûº VoltageInp
Ûº BlockInp
Ûº Trip
Ûº Start
Ûº RETURN/ENTER
Ûº
Ûº
Ûº
ÛÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼÛ
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛOn - Line 9600 bps
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
Fig. 5.4
5-28
(see Fig. 5.3 i) or a "No function" line if there is one. Upon
P1
B10300000
02.00
1.200
MAX (1ph)
001
6
f 1 Trip
S104 L03 SC1307 ER
S103 ER
SCS:SPAÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛV6.2b | V6.2bÛ
List of parameters
REG 316*4 1MRB520049-Uen / Rev. E
(see Fig. 5.3 c)
Sections 5.5.3. and
* V> Max Voltage *
and
5.5.4.
ºÛ
ºÛ
ºÛ
Select ºÛ
ºÛ
s ºÛ
UN ºÛ
Select ºÛ
ºÛ
AnalogAddr ºÛ
BinaryAddr ºÛ
SignalAddr ºÛ
SignalAddr ºÛ
ºÛ
ºÛ
ºÛ
ºÛ