File Menu - ABB REB500 Operation Manual

Section 3
HMI500
3.4
14
3 HMI:
[IP:Port]
LAN0:
[IP:Port]
4 Edit
Read-Only
5 Test
6 Install
Install/Debug
Debug
7 <Setfile>
8 <action>

File menu

Table 4 summarizes the options available in this menu. The subsequent subsections
describe the menu items "Download to protection system..." and "Compare..." in
greater detail.
Table 4 Menu items in menu File
Menu Item Description
Open... Opens a database file stored on the computer's file system.
Save as... Saves the currently open database to the computer's file system.
Upload from Saves a database from the protection system to the computer's file system.
protection system...
Download to Sends a database file from the computer's file system to the protection
protection system... system.
Compare... Compares a database file on the computer's file system to the database of
the protection system or to another database file on the computer's file
system.
Exit Terminates the program; displays a warning if there are changes that have
not been saved. You then have the choice of saving or discarding them.
Active Ethernet interface (on the device front), the IP address and the port
connected for the target communication
Active Ethernet interface communication over station bus, the IP address
and the port connected for the target communication
Permits settings to be saved in a file or downloaded to the protection
system.
It is only possible to read data.
Test generator is activated.
Test generator not active
Installation mode is active (debug mode is inactive)
Installation mode and Debug mode are active
Debug mode is active (Installation mode is inactive)
Path and name of the currently open setfile.
short message of an ongoing action
1MRK 500 124-UEN
Operation Manual
Distributed busbar protection REB500