ABB REG316 4 Series Operating Instructions Manual page 451

REG 316*4 1MRB520049-Uen / Rev. E
Installation on a hard disc under Windows 95 / NT 4.0:
1. Insert the first disc "Disk 1/4" into drive A.
2. Click on 'Start' on the task bar at the bottom of the screen.
Select 'Run' in the menu that then opens and enter 'a:\setup'.
Simply follow the instructions on the screen for the remainder of
the procedure. The installation of the remote HMI shell is op-
tional. Respond appropriately to the requests for language, drive,
directory and program group.
HMI files and configuration
After installation, the following files amongst others are in the
HMI directory:
· pcgc91.exe:
· re*.cfg:
· readme.e:
· diststd.bin:
· aurestd.bin:
· Sub-directory VDEW6:
Before the operator program can be executed, the device driver
"ansi.sys" has to be loaded. The installation program automati-
cally modifies the configuration files for the operating system.
DOS, Windows 3.x:
In the file C:\CONFIG.SYS:
device=c:\dos\ansi.sys.
Windows 95:
In the file C:\CONFIG.W40:
device=c:\win95\command\ansi.sys
Windows NT 4.0:
In the file C:\WINNT\SYSTEM32\CONFIG.NT:
device=%SystemRoot%\system32\ansi.sys
ABB Switzerland Ltd
operator program.
configuration file.
text file with explanations of the in-
stallation procedure and the latest
information about new SW ver-
sions.
distance protection function logic.
auto-reclosure function logic.
VDEW6 function logic.
5-7