ABB REG316 4 Series Operating Instructions Manual page 558

ABB Switzerland Ltd
-AD-Channels-
9 0.77IN-120°
10 51.11Hz
11 Ref.Channel 1
Fig. 5.94
5.13.8.1.2. Load values
This menu lists all the configured functions. The name "Funct.
measurands" is in the header and the configured functions on
the three lines below.
There are fewer or more lines of load values depending on the
protection functions that are configured. 'No function' is on the
second line where no function has been configured.
-Funct.Measurand
1.Current-DT
2.U>High Voltage
3.Power
Fig. 5.95
Load values display
The menu lists all the measurements by the selected function
that can be viewed. The name of the function is in the header
and its measurements on the three lines below. If there are more
than three measurements, the entire list can be viewed using the
arrow keys "
because this is the lowest level of this branch of the menu
structure. Lines 2 to 4 are empty for functions that do not have
measurements.
The values and text shown (units etc.) vary according to the
function selected.
-10.UifPQ-
1 0.997 UN
2 4.014 IN
3 10.999 P(PN)
Fig. 5.96
5-114
REG 316*4 1MRB520049-Uen / Rev. E
á
C.t. and p.t. inputs and selection of reference chan-
nel
â
Menu for selecting load values
^
" and "v". The buttons "E" and ">" have no effect,
â
Measurements by the UifPQ function