ABB REG316 4 Series Operating Instructions Manual page 219

REG 316*4 1MRB520049-Uen / Rev. F
t-max
Maximum delay after being enabled regardless of inverse
characteristic. Operating characteristic constant.
t-Reset
Time taken to reset (from the operating limit). This corre-
sponds to the time taken by the generator to cool.
NrOfPhases
defines whether single or three-phase measurement.
CurrentInp
defines the analogue current input channel.
All current inputs may be selected.
In the case of three-phase measurement, the first channel of
the group of three selected must be specified.
IB-Setting
Reference (base) current for compensating a difference in
relation to I .
N
BlockInp
Binary address used as blocking input.
F: - Not blocked
T: - Blocked
xx: - all binary inputs (or outputs of a protection
function).
Trip
Output for signalling tripping.
Start
Output for signalling pick-up.
ABB Switzerland Ltd
3-181