ABB REG316 4 Series Operating Instructions Manual page 501

REG 316*4 1MRB520049-Uen / Rev. E
list from becoming overburdened with unnecessary data. The
"0-0" event is subsequently added to the event list, should a
switch not reach its end position within the specified time. The
time stamp corresponds to the start of the switch movement.
The status "1-1" is never suppressed even during the period of
the runtime and appears in the event list immediately.
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛABB Switzerland LtdÛÛÛÛÛÛÛÛÛÛÛÛExampleÛÛÛÛÛÛÛÛÛÛÛÛÛREG316*4 Generator TerminalÛ
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛÉEdit Function ParametersÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»Û
Ûº
Ûº BinInp Card
Ûº
Ûº Time S 103/04
Ûº Time S 107/08
Ûº Time R 101/02
Ûº Time R1204/05
Ûº RETURN/ENTER
Ûº
Ûº
Ûº
Ûº
Ûº
Ûº
Ûº
Ûº
Ûº
ÛÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼÛ
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛOn - Line 9600 bps
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
Fig. 5.30 Editing the runtime supervision
The runtime setting is entered in the dialogue "Edit runtime su-
pervision" for each of the double indications that has been de-
fined.
"S" signifies a double indication configured for a local input and
an "R" one for a series RIO580 input unit.
The device number and the two inputs used for a double indica-
tion are given in the following form:
xxy1/y2
where xx = device number
y1 = number of the first input
y2 = number of the second input.
* *
03.0
04.0
04.0
20.0
SCS:SPAÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛV6.2b | V6.2bÛ
ABB Switzerland Ltd
ºÛ
ºÛ
ºÛ
s ºÛ
s ºÛ
s ºÛ
s ºÛ
ºÛ
ºÛ
ºÛ
ºÛ
ºÛ
ºÛ
ºÛ
ºÛ
ºÛ
ºÛ
5-57