Measurement Module - ABB REG316 4 Series Operating Instructions Manual

REG 316*4 1MRB520049-Uen / Rev. F
3.7.5. Measurement module (MeasureModule)
A. Application
Measurement of 3 phase voltages, 3 phase currents, active and
reactive power, power factor cos j (cos phi) and frequency, e.g.
for display on an operating device or transmission to a station
monitoring system.
B. Features
· Measurement of 3 phase voltages (Y and delta), currents,
active and reactive power, power factor cos j and frequency.
· Provision for using the 3 phase current inputs in combination
with either 3 phase-to-phase voltages or 3 phase-to-earth
voltages.
· 2 independent impulse counter inputs for calculation of
interval and accumulated energy
· The three-phase measurement and impulse counters can be
used independently and may also be disabled.
· Up to 4 measurement module functions can be configured on
one RE..16 device.
· All inputs and outputs can be configured by the user.
C. Inputs and Outputs
I. C.t./v.t. inputs
· Voltage
· Current
II. Binary inputs
· 2 impulse inputs
· 2 reset inputs
III. Binary outputs
· 2 outputs for the new counter value
ABB Switzerland Ltd
3-351