Brake - Suzuki Baleno Manual

Condition
Engine has no power
Possible Cause
Engine overheating
Injection system out of order
D Faulty fuel injection pump static timing
D Clogged fuel filter or lines
D Faulty fuel injection pump
D Faulty injector
Engine and emission control system
out of order
D Faulty CKP sensing rotor
D Faulty CKP sensor, injector needle
sensor, ECT sensor and TP sensor
D Faulty fuel injection timing control ac-
tuator
D Faulty ECM
D Malfunctioning EGR valve
D Maladjusted accelerator cable play
Low compression
Others
D Dragging brakes
D Slipping clutch
ENGINE GENERAL INFORMATION AND DIAGNOSIS 6-17
Reference Item
Refer to "Overheating" of this table.
Static timing in "ALL MODEL DIESEL
DIAGNOSIS MANUAL" listed in FORE-
WORD of this manual
Fuel filter in Section 6E3 and "ALL MODEL
DIESEL DIAGNOSIS MANUAL" listed in
FOREWORD of this manual
Fuel injection pump in Section 6E3 and
"ALL MODEL DIESEL DIAGNOSIS MANU-
AL" listed in FOREWORD of this manual
Fuel injector in Section 6E3 and "ALL
MODEL DIESEL DIAGNOSIS MANUAL"
listed in FOREWORD of this manual
CKP sensing rotor in Section 6E3
CKP sensor, injector needle sensor, ECT
sensor and TP sensor in section 6E3
Fuel injection timing control actuator in sec-
tion 6E3
Inspection of ECM and its circuit
EGR system inspection in section 6E3
Adjustment injection pump in "ALL MODEL
DIESEL DIAGNOSIS MANUAL" listed in
FOREWORD of this manual
Previously outlined.
Diagnosis in Section 5.
Diagnosis in Section 7C.