Suzuki Wagon R Manual page 769

7B-58 AUTOMATIC TRANSMISSION (4 A / T)
INSTALLATION
1) Apply A/T fluid to input revolution sensor O-ring.
2) Install input revolution sensor (2) to A/T case and tighten bolt to
specified torque.
Tightening Torque
(b): 8 N·m (0.8 kg-m, 6.0 lb-ft)
3) Connect A/T VSS – input rev. sensor coupler.
4) Connect negative cable to battery.
1. A / T VSS
VEHICLE SPEED SENSOR (VSS,
SPEEDOMETER DRIVEN GEAR)
Refer to SECTION 6E for removal, installation and inspection.
THROTTLE POSITION SENSOR
INSPECTION
Check throttle position sensor referring to SECTION 6E.
ENGINE COOLANT TEMP. (ECT) SENSOR
INSPECTION
Check engine coolant temp. sensor referring to SECTION 6E.
MANIFOLD ABSOLUTE PRESSURE (MAP)
SENSOR
INSPECTION
Check MAP sensor referring to SECTION 6E.