Suzuki Wagon R Manual page 768

1. A / T vehicle speed sensor
2. Input rev. sensor
1. A / T vehicle speed sensor
1. A / T VSS
2. Input rev. sensor
A/T VEHICLE SPEED SENSOR (A/T VSS)
INSPECTION
1) Disconnect negative cable at battery.
2) Disconnect A/T VSS – input rev. sensor coupler (1).
3) Check resistance between A/T VSS terminals(2).
A/T VSS standard resistance: 160 – 200 Ω at 20°C (68°F)
REMOVAL
1) Disconnect negative cable at battery.
2) Disconnect A/T VSS – input rev. sensor coupler.
3) Remove A/T VSS – input rev. sensor by removing its bolt.
INSTALLATION
1) Apply A/T fluid to A/T VSS O-ring.
2) Install A/T VSS to A/T case and tighten bolt to specified torque.
Tightening Torque
(a): 8 N·m (0.8 kg-m, 6.0 lb-ft)
3) Connect A/T VSS – input rev. sensor coupler.
4) Connect negative cable to battery.
INPUT REV. SENSOR
INSPECTION
1) Disconnect negative cable at battery.
2) Disconnect A/T VSS – input rev. sensor coupler (1).
3) Check resistance between input revolution sensor terminals (2).
Input revolution sensor standard resistance:
160 – 200 Ω at 20°C (68°F)
REMOVAL
1) Disconnect negative cable at battery.
2) Disconnect A/T VSS – input rev. sensor coupler.
3) Remove input rev. sensor by removing its bolt.
AUTOMATIC TRANSMISSION (4 A / T) 7B-57