Suzuki Wagon R Manual page 1943

3E-24 REAR SUSPENSION
Brake back plate bolt
Brake pipe flare nut
Differential flange bolt
Lateral rod nut (axle side)
Lateral rod nut (body side)
LSPV bolt
Rear differential carrier bolt (4WD model)
Rear shock absorber lower bolt
Shock absorber lower bolt
Trailing arm front nut
Trailing arm rear nut
Wheel bolt
26) Tighten right and left trailing arm nuts (1) and shock
27) Check to ensure that brake drum is free from dragging and
28) Perform brake test (foot brake and parking brake).
29) If equipped with LSPV, check and adjust LSPV spring refer-
30) Check each installed part for oil leakage.
Tightening Torque Specifications
Fastening part
absorber lower bolts (2) to specified torque.
Tighten lateral rod nuts (3) to specified torque.
NOTE:
When tightening these bolts and nuts, be sure that vehi-
cle is off hoist and in non loaded condition.
Tightening torque
Trailing arm rear nut
(a): 80 N·m (8.0 kg-m, 58.0 lb-ft)
Rear shock absorber lower bolt
(b): 63 N·m (6.3 kg-m, 45.5 lb-ft)
Lateral rod nut (axle side)
(c): 50 N·m (5.0 kg-m, 36.5 lb-ft)
Lateral rod nut (body side)
(d): 100 N·m (10.0 kg-m, 72.5 lb-ft)
Trailing arm front nut
(e): 90 N·m (9.0 kg-m, 65.0 lb-ft)
proper braking is obtained.
ring to "LSPV Inspection and Adjustment" in Section 5A and
perform "Fluid Pressure Test" in Section 5.
N•m
23
16
23
50
100
26
23
63
63
90
80
95
Tightening torque
kg-m lb-ft
2.3 17.0
1.6 11.5
2.3 17.0
5.0 36.5
10.0 72.5
2.6 19.0
2.3 17.0
6.3 45.5
6.3 45.5
9.0 65.0
8.0 58.0
9.5 69.0