Table of Contents
Advertisement
Main Menu
• Press the new lower bearing into the gearbox
housing until it seats using a press and special
tool.
NOTE:
• Install the lower bearing with the wider side of
the outer race toward the bottom of the
gearbox.
• Hold the outer race with the tool securely.
• Do not allow dust and other foreign materials to
enter the lower bearing.
P/S ADJUSTMENT GUIDE
07973-6920001
11. Insert the steering rack into the cylinder housing,
being careful not to damage the steering rack
sliding surface.
Table of Contents
12. Install the steering pinion into the gearbox.
NOTE: Do not engage the steering pinion with the
steering rack this time.
13. If the pinion dust seal was removed, drive in the
new dust seal until it bottoms on the step on the pi-
nion set screw.
14. Grease the sealing lip of the pinion dust seal.
Advertisement
Chapters
Table of Contents
