SSANGYONG Y200 Manual page 2309

DI10-62
DTC Trouble
P0652 ECU Supply Voltage 2 Fault
- Low (5 V)
P0653 ECU Supply Voltage 2 Fault
- High (5 V)
P0651 ECU Supply Voltage 2 Fault
(5 V)
P0698 ECU Supply Voltage Fault -
Low (2.5 V)
P0699 ECU Supply Voltage Fault -
High (2.5 V)
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Help
- Malfunction reference supply voltage
from ECU
• Supply voltage: 5 V
- Check the supply voltage to each sen-
sor
• Supply voltage (5 V): accelerator
pedal sensor 1, HFM sensor, rail
pressure sensor, booster pressure
sensor, cam sensor
- Check the wiring harnesses.
- Replace the ECU if required.
- Malfunction reference supply voltage
from ECU
• Supply voltage: 5 V
- Check the supply voltage to each sen-
sor
• Supply voltage (5 V): accelerator
pedal sensor 1, HFM sensor, rail
pressure sensor, booster pressure
sensor, cam sensor
- Check the wiring harnesses.
- Replace the ECU if required.
- Malfunction reference supply voltage
from ECU
• Supply voltage: 5 V
- Check the supply voltage to each sen-
sor
• Supply voltage (5 V): accelerator
pedal sensor 1, HFM sensor, rail
pressure sensor, booster pressure
sensor, cam sensor
- Check the wiring harnesses.
- Replace the ECU if required.
- Malfunction reference supply voltage
from ECU
• Supply voltage: 2.5 V
- Check the supply voltage to each sen-
sor
• Supply voltage (2.5 V): accelerator
pedal sensor 2
- Check the wiring harnesses.
- Replace the ECU if required.
- Malfunction reference supply voltage
from ECU
• Supply voltage: 2.5 V
- Check the supply voltage to each sen-
sor
• Supply voltage (2.55 V): accelera-
tor pedal sensor 2
- Check the wiring harnesses.
- Replace the ECU if required.
Torque Torque Delayed
Reduction Reduction Engine
(max.50%) (max.20%) Stop
O
O
O
Immediately Limp
Engine Home
Stop Mode
O
O
O
DIAGNOSIS
DI ENG SM - 2004.4