Subaru Legacy 2004 Service Manual page 2412

AUTOMATIC TRANSMISSION
21.ATF Cooler Pipe & Hose
A: REMOVAL
1. EXCEPT FOR ATF COOLER MODEL
WITH WARMER FUNCTION
1) Set the vehicle on a lift.
2) Remove the battery.
3) Lift-up the vehicle.
4) Remove the under cover.
5) Remove the radiator under cover.
6) Disconnect the ATF cooler hose from radiator.
NOTE:
• Do not use a screwdriver or other pointed tools.
• When hard to remove the hose, wrap the hose
with cloth to prevent from damaging, and then turn
with pliers and pull out with hand straightly.
ATF Cooler Pipe & Hose
7) Disconnect the ATF cooler hoses from pipes.
NOTE:
• Do not use a screwdriver or other pointed tools.
• When hard to remove the hose, wrap the hose
with cloth to prevent from damaging, and then turn
with pliers and pull out with hand straightly.
8) Disconnect the ATF cooler pipe from frame.
AT-01344
AT-01345
5AT-64
AT-01388
AT-01347