9) Remove the oil cooler inlet and outlet pipes.
NOTE:
When disconnecting the outlet pipe, be careful not
to lose the ball and spring used with retaining
screw.
(A)
(B)
(A) Outlet pipe
(B) Inlet pipe
2. ATF COOLER MODEL WITH WARMER
FUNCTION
1) Lift-up the vehicle.
2) Remove the front exhaust pipe.
<Ref. to EX(H6DO)-5, REMOVAL, Front Exhaust
Pipe.>
3) Disconnect the inlet and outlet hoses of the ATF
cooler pipe from oil cooler pipe.
4) Remove the union screw of oil cooler inlet and
outlet pipes.
ATF Cooler Pipe & Hose
5) Remove the pipe securing bolts on the side of
transmission.
6) Lower the vehicle.
7) Remove the air intake chamber.
<Ref. to IN(H6DO)-7, REMOVAL, Air Intake Cham-
AT-01383
ber.>
8) Remove the resonator chamber.
<Ref. to IN(H6DO)-9, REMOVAL, Resonator
Chamber.>
9) Remove the oil charge pipe. <Ref. to 5AT-70,
REMOVAL, Oil Charge Pipe.>
10) Disconnect the ATF cooler hoses and pipes.
11) Remove the pitching stopper bracket securing
bolt and bolt on the side of transmission, and then
remove ATF cooler pipe.
AT-02027
AT-02029
5AT-65
AUTOMATIC TRANSMISSION
AT-02028
AT-02030
AT-02033