Subaru Legacy 2004 Service Manual page 2414

Hide thumbs Also See for Legacy 2004:

Table of Contents

AUTOMATIC TRANSMISSION

12) Remove the ATF cooler from the installation

bracket as necessary.

13) Remove the ATF cooler bracket from transmis-

sion body as necessary.

B: INSTALLATION

1. EXCEPT FOR ATF COOLER MODEL

WITH WARMER FUNCTION

1) Install the oil cooler inlet and outlet pipes with

Tightening torque:

m (2.5 kgf-m, 18.1 ft-lb)

m (4.5 kgf-m, 32.5 ft-lb)

ATF Cooler Pipe & Hose

2) Install the ATF cooler pipe to frame.

3) Connect the ATF cooler hose to pipe on the

transmission side.

• Install so that the hose is not folded over, exces-

sively bent or twisted.

• Be careful to insert the hose to the specified po-

Chapters

Table of Contents