Subaru Legacy 2004 Service Manual page 2420

AUTOMATIC TRANSMISSION
25.Extension Case & Intermedi-
ate Case
A: REMOVAL
1) Remove the transmission assembly.
<Ref. to 5AT-38, REMOVAL, Automatic Transmis-
sion Assembly.>
2) Remove the rear vehicle speed sensor.
3) Separate the extension case and intermediate
case.
4) Separate the intermediate case and transmis-
sion main case.
B: INSTALLATION
1) Secure the intermediate case to transmission
main case.
Tightening torque:
!
25 N m (2.5 kgf-m, 18.4 ft-lb)
Extension Case & Intermediate Case
AT-01950
AT-01951
AT-01952
5AT-72
NOTE:
Use a new gasket.
2) Attach the selected reduction driven gear shim
to end surface of reduction driven gear with vase-
line. <Ref. to 5AT-79, ADJUSTMENT, Reduction
Driven Gear.>
3) Install the extension case to intermediate case.
NOTE:
Use a new gasket.
Tightening torque:
!
25 N m (2.5 kgf-m, 18.4 ft-lb)
4) Install the rear vehicle speed sensor.
Tightening torque:
!
7 N m (0.7 kgf-m, 5.1 ft-lb)
5) Install the transmission assembly.
<Ref. to 5AT-42, INSTALLATION, Automatic
Transmission Assembly.>
AT-01952
AT-01951
AT-01950