Subaru Legacy 2004 Service Manual page 2399

3) Apply proper amount of liquid gasket to the en-
tire oil pan mating surface.
Liquid gasket:
THREE BOND 1217B (Part No. K0877YA020)
4) Install the oil pan by equally tightening the bolts.
Tightening torque:
$
5 N m (0.5 kgf-m, 3.7 ft-lb)
5) Install the center differential carrier. <Ref. to
5AT-80, INSTALLATION, Center Differential Carri-
er.>
6) Install the intermediate case.
Tightening torque:
$
25 N m (2.5 kgf-m, 18.4 ft-lb)
7) Install the extension case.
Tightening torque:
$
25 N m (2.5 kgf-m, 18.4 ft-lb)
Front Vehicle Speed Sensor
8) Install the rear vehicle speed sensor.
Tightening torque:
AT-01955
9) Install the transmission assembly into the vehi-
cle. <Ref. to 5AT-42, INSTALLATION, Automatic
Transmission Assembly.>
10) Pour ATF from the oil charge pipe. <Ref. to
5AT-27, REPLACEMENT, Automatic Transmis-
sion Fluid.>
11) Check the level and leaks of the ATF. <Ref. to
5AT-27, INSPECTION, Automatic Transmission
Fluid.>
AT-01952
AT-01951
5AT-53
AUTOMATIC TRANSMISSION
$
7 N m (0.7 kgf-m, 5.2 ft-lb)
AT-01950