Subaru Legacy 2004 Service Manual page 2415

4) Connect the ATF cooler hose to pipe on radiator
side.
NOTE:
• Install so that the hose is not folded over, exces-
sively bent, or twisted.
• Be careful to insert the hose to the specified po-
sition.
5) Install the radiator under cover.
Tightening torque:
!
4.9 N m (0.5 kgf-m, 3.6 ft-lb)
6) Install the under cover.
7) Install the battery.
8) Fill ATF. <Ref. to 5AT-27, Automatic Transmis-
sion Fluid.>
NOTE:
Make sure there are no ATF leaks in joints between
the transmission, radiator, pipes, and hoses.
ATF Cooler Pipe & Hose
2. ATF COOLER MODEL WITH WARMER
FUNCTION
1) Install the ATF cooler bracket if it is removed
from transmission body.
Tightening torque:
25 N
AT-01345
2) Install the ATF cooler if it is removed from instal-
lation bracket.
Tightening torque:
25 N
AT-01344
3) Install the pitching stopper securing bracket and
bolt on the side of transmission.
5AT-67
AUTOMATIC TRANSMISSION
!
m (2.5 kgf-m, 18.1 ft-lb)
!
m (2.5 kgf-m, 18.1 ft-lb)
AT-02032
AT-02031
AT-02033