Initialization And Recovery; Reset Commands - Avaya Definity SI Maintenance Manual

Initialization and Recovery

When the system is initially powered up, or when it experiences a catastrophic
fault that interrupts its basic functions, the system either initializes or reboots.

Reset commands

Besides "reboot," there are several less severe resets available to the system that
allow it to recover from disrupting errors. The user can initiate these resets by
using the reset system commands. These commands are used to manually
restart the system at various levels, depending on the required test activity. The
reset system commands are discussed in
and Trouble-Clearing
A system is reset due to a loss of power, or via one of the following:
reset commands at the administration terminal
Maintenance software, from which the system can reset itself (this process
starts when certain software and hardware errors are detected by the
software.)
"interchange," a type of reset that can be scheduled as part of daily
maintenance in High or Critical Reliability systems
!
555-233-123
Aids''.
WARNING:
When the system is rebooted or reset at level 2, 3, 4, or 5, all voice
terminal and attendant console features are adversely affected.
Users should be advised of services that are lost and that, as a result,
must be reactivated. See "Removing Power" in
Maintenance Procedures''.
Chapter 8, ''Maintenance Commands
Chapter 5, ''Routine
Issue 4 May 2002
4
4-1