Avaya Definity SI Maintenance Manual page 95

Reset commands
Reset System 2 (System Cold Start
Without Translations Loading)
All Port circuit packs are reset. All telephone sessions are dropped. Telephones
begin to reconnect to the switch within 30 seconds. In a large system,
reconnection of all telephones may take up to five minutes.
In this restart, all software (Oryx/Pecos, drivers, maintenance, and so forth) is
reset. In addition, the TDM Bus and all port circuit packs are reset.
Typical display
INTERNAL REGISTER TEST
LOCAL BUS TEST
ROM CHECKSUM TEST
CONTROL STATUS TEST
DCACHE TEST
ICACHE TEST
WRITE BUFFER TEST
BTO TEST
TIMER TEST
RESET 2 (COLD_2) PERFORMED
Reset System 3 (System Cold Start
With Translations Loading)
Emergency Transfer is invoked. Translations reload from translation card.
Depending on the translations, the reloading process could take from five to 30
seconds. Thereafter, all port circuit packs are reset, and all telephone sessions
drop. Telephones begin to reconnect to the switch within 30 seconds. In a large
system, reconnection of all telephones may take up to five minutes.
In this restart, all software (Oryx/Pecos, drivers, maintenance, and so forth) is
reset. After the software is reset, all translations load from translation card. In
addition, the TDM Bus and all port circuit packs are reset.
555-233-123
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
Issue 4 May 2002 4-3