Verify Connectivity To The Backup Files; Restore Data - Avaya S8300 Series Replacement Manual

Job Aid: S8300 Communication Manager and co-resident SES: Replacing the S8300C or S8300D Server or
Note:
If an Action Cancelled message appears before the Success message, refresh
Note:
the screen and click Change again.
9. When the configuration change is complete, the "Successfully configured ethernet
interfaces" message displays.
10. Click Close Window.

Verify connectivity to the backup files

To verify that the Ethernet port is working, ping the FTP server where the backup files are
stored.
1. On the Server (Maintenance) Web page select Diagnostics > Ping.
2. Enter the IP address of the device on which the backup files are stored.
3. Click Execute Ping.
If the ping is successful, continue with
connectivity to the server.

Restore Data

To restore backup data:
1. On the Server (Maintenance) Web page select Data Backup/Restore > View/Restore
Data.
The system displays the View/Restore Data screen.
2. Select from one of the following back up methods:
Select Network Device if the backup files are on a network device, go to step 3.
●
Select Local PC Card if the backup files are on the USB CompactFlash card, go to Step
●
5.
Note:
The available network device method depends on the release of Communication
Note:
Manager running on the server. For a few earlier release, the only network device
method available is FTP.
3. In the Method drop-down box, select FTP.
4. Fill in these fields:
32 Job Aids for Field Replacements (FRUs) for the Avaya S8300 Server with the G700 Media Gateway
Restore Data. Otherwise, check the IP address and