Delta Electronics ASDA-B2 series User Manual page 71

Chapter 3 Connections and Wiring
3.3.4 User-defined DI and DO signals
If the default DI and DO signals could not be able to fulfill users' requirements, there
are still user-defined DI and DO signals. The setting method is easy and they are all
defined via parameters. The user-defined DI and DO signals are defined via
parameters P2-10 to P2-17 P2-36 and P2-18 to P2-22 and P-37. Please refer to the
following Table 3.H for the settings.
Table 3.H User-defined DI and DO signals
Signal Name
DI1-
DI2-
DI3-
DI4-
DI DI5-
DI6-
DI7-
DI8-
DI9
3-36
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
Pin No. Parameter
CN1-9
P2-10
CN1-10
P2-11
CN1-34
P2-12
CN1-8
P2-13
CN1-33
P2-14
CN1-32
P2-15
CN1-31
P2-16
CN1-30
P2-17
CN1-12 P2-36
Signal Name Pin No.
DO1+ CN1-7
DO1- CN1-6
DO2+ CN1-5
DO2- CN1-4
DO3+ CN1-3
DO3- CN1-2
DO
DO4+ CN1-1
DO4- CN1-26
DO5+ CN1-28
DO5- CN1-27
DO6+ CN1-16
DO6- CN1-15
ASDA-B2
Parameter
P2-18
P2-19
P2-20
P2-21
P2-22
P2-37
Revision September 2013