Delta Electronics ASDA-B2 series User Manual page 247

Chapter 7 Servo Parameters
P3-08■
MNS
Operation
Interface:
Default: 0000
Control
Mode:
Unit: N/A
Range: refer to the description of Settings
Data Size: 16-bit
Display
Format:
Settings:
This parameter is used to monitor the data of the servo drive via communication. The
monitor data can be displayed on PC upon the data scope function provided by
ASDA-Soft software.
Word
Function
Range
H: Monitor mode, the value must be within the range from 0 through 3.
0: Disabled, i.e. disable monitor function.
1: Reserved.
2: High-speed monitor mode. The sampling time is 2000 times per second and 4
channels can be monitored.
3: High-speed monitor mode. The sampling time is 4000 times per second and 2
channels can be monitored.
P3-09 Reserved (Do Not Use)
P3-10 Reserved (Do Not Use)
P3-11 Reserved (Do Not Use)
7-82
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
Monitor Mode
Keypad / Software
ALL
Hexadecimal
-
-
0
Communication
- Low
- Monitor mode
0 0
ASDA-B2
Address: 0310H
0311H
Related Section:
Section 8.2
High
0 ~ 3
Address: 0312H
0313H
Address: 0314H
0315H
Address: 0316H
0317H
Revision September 2013