Delta Electronics ASDA-B2 series User Manual page 263

Chapter 7 Servo Parameters
Setting value: 0x48
DI Name
Torque command source. Please refer to the settings of
TQP
P2-66 Bit0.
Setting value: 0x49
DI Name
Torque command source. Please refer to the settings of
TQN
P2-66 Bit0.
NOTE
1) 11 ~ 17: Single control mode, 18 ~ 20: Dual control mode
When P2-10 to P2-17 and P2-36 is set to 0, it indicates input function is disabled
2)
7-98
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
DI Function Description
DI Function Description
ASDA-B2
Trigger Control
Method Mode
Level
T
Triggered
Trigger Control
Method Mode
Level
T
Triggered
.
Revision September 2013