Delta Electronics ASDA-B2 series User Manual page 49

Chapter 3 Connections and Wiring
Encoder Cable
Servo Drive
ASD-B2-0121-
ASD-B2-0221-
ASD-B2-0421-
ASD-B2-0721-
ASD-B2-1021-
ASD-B2-1521-
ASD-B2-2023-
ASD-B2-3023-
NOTE
1) Please use shielded twisted-pair cables for wiring to prevent voltage coupling and
eliminate electrical noise and interference.
2) The shield of shielded twisted-pair cables should be connected to the SHIELD end
(terminal marked
3) In order to prevent fire hazard and accidents, please form the wiring by following the
cable specifications outlined above.
4) The boxes () at the ends of the servo drive model names represent the model type of
ASDA-B2 series. For the actual model name, please refer to the ordering information of
the actual purchased product.
5) The boxes () in the servo motor model names are for optional configurations (keyway,
brake and oil sea).
3-14
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
Encoder Cable - Wire Gauge AWG (mm
Wire Size Core Number
0.13 (AWG26) 10 core (4 pair)
0.13 (AWG26) 10 core (4 pair)
0.13 (AWG26) 10 core (4 pair)
0.13 (AWG26) 10 core (4 pair)
0.13 (AWG26) 10 core (4 pair)
0.13 (AWG26) 10 core (4 pair)
0.13 (AWG26) 10 core (4 pair)
0.13 (AWG26) 10 core (4 pair)
) of the servo drive.
2
)
Standard Wire
UL Rating
Length
UL2464 3m (9.84ft.)
UL2464 3m (9.84ft.)
UL2464 3m (9.84ft.)
UL2464 3m (9.84ft.)
UL2464 3m (9.84ft.)
UL2464 3m (9.84ft.)
UL2464 3m (9.84ft.)
UL2464 3m (9.84ft.)
Revision September 2013
ASDA-B2