Delta Electronics ASDA-B2 series User Manual page 181

Chapter 7 Servo Parameters
communication address of this parameter via communication port.
When reading the drive status through the keypad, if P0-02 is set to 25, VAR-3 will
quickly show for about two seconds and then the value of P0-11 will display on the
display.
P0-12★
CM4
Operation
Interface:
Default: -
Control
Mode:
Unit: -
Range: -
Data Size: 32-bit
Display
Format:
Settings:
This parameter is used to provide the value of one of the status monitoring functions
found in P0-02. The value of P0-12 is determined by P0-20 (desired drive status)
through communication setting or the keypad. The drive status can be read from the
communication address of this parameter via communication port.
When reading the drive status through the keypad, if P0-02 is set to 26, VAR-4 will
quickly show for about two seconds and then the value of P0-12 will display on the
display.
P0-13★
CM5
Operation
Interface:
Default: -
Control
Mode:
Unit: -
Range: -
Data Size: 32-bit
Display
Format:
Settings:
This parameter is used to provide the value of one of the status monitoring functions
found in P0-02. The value of P0-12 is determined by P0-20 (desired drive status)
through communication setting or the keypad. The drive status can be read from the
communication address of this parameter via communication port.
P0-14 Reserved (Do Not Use)
P0-15 Reserved (Do Not Use)
7-16
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
Status Monitor 4
Keypad/Software
ALL
Decimal
Status Monitor 5
Keypad/Software
ALL
Decimal
Communication
Communication
Address: 001CH
Address: 001EH
ASDA-B2
Address: 0018H
0019H
Related Section:
Section 4.3.5
Address: 001AH
001BH
Related Section:
Section 4.3.5
001DH
001FH
Revision September 2013