Delta Electronics ASDA-B2 series User Manual page 45

Chapter 3 Connections and Wiring
Terminal Identification of Encoder Connector
Servo Drive
(CN2)
View from this side
Blue
T+
Blue/Black
T-
Red/
Red&White
DC+5V
The core color of the drive encoder connector
is for reference only. For the actual core color,
please refer to the actual purchased product.
If the users do not use the connector (without housing) and connect the cores from the
cable for wiring, please follow the terminal identification and core number of encoder
connector shown in the above table to complete the wiring. The users need to connect
core #1 to core #1, core #2 to core #2 and so on. To ease connection and to avoid
wiring error, it is recommended to number the cores first in accordance with the
terminal identification and then conducting the wiring.
3-10
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
Connector of Encoder
Cable (Drive Side)
Housing : AMP(1-172161-9)
Green
(Reserved) (Reserved)
Green/
Black
(Reserved)
(Reserved)
Black/Black
&White
Shield
GND
Connector of Encoder
Cable (Motor Side)
View from this side
Black
(Reserved) (Reserved)
Red/Black
(Reserved) (Reserved)
Blue
Shield
GND
ASDA-B2
Motor
Encoder
White
T+
White/Red
T-
Brown
DC+5V
Revision September 2013