Delta Electronics ASDA-B2 series User Manual page 198

ASDA-B2
Control
Mode:
Unit: 0.1Hz
Range: 10 ~ 1000
Data Size: 16bit
Display
Format:
Example
Settings: The setting value of the second low-frequency vibration suppression. If
P1-28 VSG2
Operation
Interface:
Default: 0
Control
Mode:
Unit: -
Range: 0~9 (0: Disable the second low-frequency
Data Size: 16bit
Display
Format:
Settings: The second low-frequency vibration suppression gain. The bigger value
P1-31 Reserved (Do Not Use)
P1-32 LSTP
Operation
Interface:
Default: 0
Control
Mode:
Unit: -
Range: 0 ~ 20
Data Size: 16-bit
Display
Format:
Settings:
Revision September 2013
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
PT
DEC
150=15Hz
P1-28 is set to 0, then it will disable the second low-frequency filter.
Low-frequency Vibration Suppression Gain
(2)
Keypad/Software
PT
filter)
DEC
it is, the better the position response will be. However, if the value is set
too big, the motor will not be able to smoothly operate. It is suggested
to set the value to 1.
Motor Stop Mode Selection
Keypad/Software
ALL
Hexadecimal
Chapter 7 Servo Parameters
Communication
Address: 013EH
Communication
Address: 0138H
0139H
Related Section:
Section 6.2.9
013FH
Address: 0140H
0141H
Related Section: N/A
7-33