Delta Electronics ASDA-B2 series User Manual page 246

ASDA-B2
Display
Format:
Settings:
RS-232 Communication interface selection
0: RS-232 via Modbus communication
1: RS-232 upon ASDA-Soft software
P3-06■ SDI
Operation
Interface:
Default: 0
Control
Mode:
Unit: N/A
Range: 0x0000 ~ 0x1FFF
Data Size: 16-bit
Display
Format:
Settings:
The setting of this parameter determines how the Digital Inputs (DI) accept commands
and signals.
Bit0 ~ Bit 8 corresponds with DI1 ~ DI9. The least significant bit (Bit0) shows DI1
status and the most significant bit (Bit7) shows DI8 status.
Bit settings:
0: Digital input is controlled by external command (via CN1)
1: Digital input is controlled by parameter P4-07
For the settings of DI1 ~ DI9, please refer to P2-10 ~ P2-17 and P2-36.
This parameter P3-06 also works in conjunction with the parameter P4-07 which has
several functions. Please see section 8.2 for details.
P3-07
CDT
Operation
Interface:
Default: 0
Control
Mode:
Unit: 1ms
Range: 0 ~ 1000
Data Size: 16-bit
Display
Format:
Settings:
This parameter is used to delay the communication time that servo drive responds to
host controller (external controller).
Revision September 2013
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
Hexadecimal
Digital Input Communication Function
Keypad / Software
ALL
Hexadecimal
Communication Response Delay Time
Keypad / Software
ALL
Decimal
Communication
Communication
Chapter 7 Servo Parameters
Address: 030CH
030DH
Related Section:
Section 8.2
Address: 030EH
030FH
Related Section:
Section 8.2
7-81