Delta Electronics ASDA-B2 series User Manual page 144

ASDA-B2
P2-45 NCF3
Operation
Interface:
Default: 1000
Control
Mode:
Unit: Hz
Range: 50 ~ 2000
Data Size: 16-bit
Display
Format:
Settings:
This parameter is used to set third resonance frequency of mechanical system. It can
be used to suppress the resonance of mechanical system and reduce the vibration of
mechanical system.
If P2-45 is set to 0, this parameter is disabled.
P2-46 DPH3
Operation
Interface:
Default: 0
Control
Mode:
Unit: dB
Range: 0 ~ 32
Data Size: 16-bit
Display
Format:
Settings:
This parameter is used to set magnitude of the resonance suppression that is set by
parameter P2-45. If P2-46 is set to 0, the parameters P2-45 and P2-46 are both
disabled.
P2-25 NLP
Operation
Interface:
Default: 0.2 (1kW and below
Control
Mode:
Revision September 2013
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
Notch Filter 3 (Resonance Suppression)
Keypad/Software
ALL
Decimal
Notch Filter Attenuation Rate 3
(Resonance Suppression)
Keypad/Software
ALL
Decimal
Low-pass Filter Time Constant
(Resonance Suppression)
Keypad/Software
models) or 0.5 (other
models)
ALL
Chapter 6 Control Modes of Operation
Communication
Communication
Communication
2 (1kW and below
models) or 5 (other
models)
Address: 025AH
025BH
Related Section:
Section 6.3.7
Address: 025CH
025DH
Related Section:
Section 6.3.7
Address: 0232H
0233H
Related Section:
Section 6.3.7
6-29