Delta Electronics ASDA-B2 series User Manual page 262

ASDA-B2
Setting value: 0x26
DI Name
Torque limit - Forward operation (Torque limit function is
TRLM
valid only when P1-02 is enabled)
Setting value: 0x37
DI Name
Forward JOG input. When JOGU is activated, the motor will
JOGU
JOG in forward direction. [see P4-05]
Setting value: 0x38
DI Name
Reverse JOG input. When JOGD is activated, the motor will
JOGD
JOG in reverse direction. [see P4-05]
Setting value: 0x43, 0x44
DI Name
Electronic gear ratio (Numerator) selection 0 ~ 1 [see P2-60
~ P2-62]
GNUM0
GNUM1
Setting value: 0x45
DI Name
Pulse inhibit input. When the drive is in position mode, if
INHP INHP is activated, the external pulse input command is not
valid.
Revision September 2013
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
DI Function Description
DI Function Description
DI Function Description
DI Function Description
DI Function Description
Chapter 7 Servo Parameters
Trigger Control
Method Mode
Level
PT, S
Triggered
Trigger Control
Method Mode
Level
All
Triggered
Trigger Control
Method Mode
Level
All
Triggered
Trigger Control
Method Mode
Level
PT
Triggered
Trigger Control
Method Mode
Level
PT
Triggered
7-97