Delta Electronics ASDA-B2 series User Manual page 217

Chapter 7 Servo Parameters
Control
Mode:
Unit: N/A
Range: 0 ~ 65535
Data Size: 16-bit
Display
Format:
Settings:
Special parameter setting:
Parameter
code
10
20
22
406
400
Password protective setting for protecting the parameter from the end-users:
1. After enter the 5 digital numbers, please enter the same password again. And
the setting shall be finished.
2. When turning on the power again, the proctective password will be activated.
Parameter setting after setting up the password:
When entering the correct password, the parameter can be set.
Clear the password: After entering the correct password, please enter "0" twice
continuously.
P2-09 DRT
Operation
Interface:
Default: 2
Control
Mode:
Unit: 2ms
Range: 0 ~ 20
Data Size: 16-bit
Display
Format:
Input Value
Example:
Settings:
7-52
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
ALL
Decimal
Function
Parameter reset (Please re-power on the
servo drive after reseting)
Set P2-08 to 20 can change the value of
P4-10
Set P2-08 to 22 can change the value of
P4-11~P4-19
DO mode will be forced to be activated.
When force to activate the DO mode, set
P2-08 to 400 can switch the mode back to
normal DO mode.
Bounce Filter
Keypad/Software
ALL
Decimal
4 = 8 ms
Communication
ASDA-B2
Address: 0212H
0213H
Related Section: N/A
Revision September 2013