Delta Electronics ASDA-B2 series User Manual page 252

ASDA-B2
Unit: N/A
Range: Read only
Data Size: 16-bit
Display
Format:
Settings:
This parameter is used to check if MODE, UP, DOWN, SHIFT, and SET keys on the
drive keypad being pressed or not. It is used to examine if these five keys work
normally via communication during production.
P4-09★
MOT
Operation
Interface:
Default: N/A
Control
Mode:
Unit: N/A
Range: 0 ~ 0x3F
Data Size: 16-bit
Display
Format:
Settings:
There is no difference when reading DO output signal via the drive keypad or the
communication.
P4-10■ CEN
Operation
Interface:
Default: 0
Control
Mode:
Unit: N/A
Range: 0 ~ 6
Data Size: 16-bit
Display
Format:
Settings:
0: Reserved
1: Execute analog speed input drift adjustment
2: Execute analog torque input drift adjustment
3: Execute current detector (V phase) drift adjustment
4: Execute current detector (W phase) drift adjustment
5: Execute drift adjustment of the above 1~4
6: Execute IGBT NTC calibration
Please note:
Revision September 2013
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
Hexadecimal
Output Status (Read-only)
Keypad / Software
ALL
Hexadecimal
Adjustment Function
Keypad / Software
ALL
Decimal
Communication
Communication
Chapter 7 Servo Parameters
Address: 0412H
0413H
Related Section:
Section 4.4.5
Address: 0414H
0415H
Related Section: N/A
7-87