Delta Electronics ASDA-B2 series User Manual page 306

ASDA-B2
Model: ECMA Series
Brake release time
[ms (Max)]
Brake pull-in time
[ms (Max)]
Vibration grade (um)
Operating temperature
Storage temperature
Operating humidity
Storage humidity
Vibration capacity
IP rating
Approvals
Footnote:
*1 Rate torque values are continuous permissible values at 0~40
attaching with the sizes of heatsinks listed below:
ECMA-__04 / 06 / 08 : 250mm x 250mm x 6mm
ECMA-__10 : 300mm x 300mm x 12mm
ECMA-__13 : 400mm x 400mm x 20mm
ECMA-__18 : 550mm x 550mm x 30mm
Material type : Aluminum – F40, F60, F80, F100, F130, F180
*2 The holding brake is used to hold the motor shaft, not for braking the rotation. Never use it
decelerating or stopping the machine.
*3 For the specifications of the motors with rotary magnetic encoders, please refer to the
specifications of the corresponding standard models.
*4 (△) in the mode of servo motor indicates the type of encoder. △ = 1: increment, 20-bit; △= 2:
increment, 17-bit.
NOTE
1) Please refer to Section 1.2 for details about the model explanation.
Revision September 2013
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
E△13
05 10 15
10 10 10
70 70 70
20% to 90% RH (non-condensing)
20% to 90% RH (non-condensing)
IP65 (when waterproof connectors are used, or when an oil seal is used to be
fitted to the rotating shaft (an oil seal model is used))
E△18 F△18
20 20 30 30
10 10 10 10
70 70 70 70
15
o
0 ~ 40 C
o
-10 ~ 80 C
2.5G
o
C ambient temperature when
Chapter 10 Specifications
G△13
03 06 09
10 10 10
70 70 70
for
10-7