Delta Electronics ASDA-B2 series User Manual page 230

ASDA-B2
P2-37
DO6
Operation
Interface:
Default: 7
Control
Mode:
Unit: N/A
Range: 0 ~ 013Fh
Data Size: 16-bit
Display
Format:
Settings: Refer to P2-18 for explanation.
P2-38 Reserved (Do Not Use)
P2-39 Reserved (Do Not Use)
P2-40 Reserved (Do Not Use)
P2-41 Reserved (Do Not Use)
P2-42 Reserved (Do Not Use)
P2-43 NCF2
Operation
Interface:
Default: 1000
Control
Mode:
Unit: Hz
Range: 50 ~ 2000
Data Size: 16-bit
Display
Format:
Settings:
This parameter is used to set second resonance frequency of mechanical system. It
can be used to suppress the resonance of mechanical system and reduce the
vibration of mechanical system.
If P2-43 is set to 0, this parameter is disabled.
The parameters P2-23 and P2-24 are the first group of notch filter parameters and the
parameters P2-43 and P2-44 are the second group of notch filter parameters.
Revision September 2013
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
Digital Output Terminal 6 (DO6)
Keypad/Software
ALL
Hexadecimal
Notch Filter 2 (Resonance Suppression)
Keypad/Software
ALL
Decimal
Chapter 7 Servo Parameters
Communication
Address: 024CH
Address: 024EH
Address: 0250H
Address: 0252H
Address: 0254H
Communication
Address: 024AH
024BH
Related Section:
Table 7.B
024DH
024FH
0251H
0253H
0255H
Address: 0256H
0257H
Related Section:
Section 6.3.7
7-65