Delta Electronics ASDA-B2 series User Manual page 43

Chapter 3 Connections and Wiring
Terminal
Identification
(Red)
A
B
C
D
When selecting the wire rod, please choose 600V PVC cable and the length should not longer
than 30m. If the length exceeds 30m, please take the received voltage into consideration when
selecting the wire size. Please refer to Section 3.1.6 for wire rod selection.
NOTE
1) The coil of brake has no polarity. The names of terminal identification are BRAKE1 (Blue) and
BRAKE2 (Brown).
2) The power supply for brake is DC24V. Never use it for VDD, the +24V source voltage.
3) Box, () in servo motor model represents brake or keyway / oil seal.
3-8
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
U V W
(White) (Black)
1 2
1 2
F I
D E
CASE GROUND
(Green)
3 4
4 5
B E
F G
ASDA-B2
BRAKE1 BRAKE2
(Blue) (Brown)
- -
3 6
G H
A B
Revision September 2013