Delta Electronics ASDA-B2 series User Manual page 222

ASDA-B2
Settings: Refer to P2-18 for explanation.
P2-21 DO4
Operation
Interface:
Default: 105
Control
Mode:
Unit: N/A
Range: 0 ~ 013Fh
Data Size: 16-bit
Display
Format:
Settings: Refer to P2-18 for explanation.
P2-22 DO5
Operation
Interface:
Default: 7
Control
Mode:
Unit: N/A
Range: 0 ~ 013Fh
Data Size: 16-bit
Display
Format:
Settings: Refer to P2-18 for explanation.
P2-23 NCF1
Operation
Interface:
Default: 1000
Control
Mode:
Unit: Hz
Range: 50 ~ 2000
Data Size: 16-bit
Display
Format:
Settings:
This parameter is used to set first resonance frequency of mechanical system. It can
be used to suppress the resonance of mechanical system and reduce the vibration of
mechanical system.
If P2-24 is set to 0, this parameter is disabled.
The parameters P2-23 and P2-24 are the first group of notch filter parameters and the
parameters P2-43 and P2-44 are the second group of notch filter parameters.
Revision September 2013
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
Digital Output Terminal 4 (DO4)
Keypad/Software
ALL
Hexadecimal
Digital Output Terminal 5 (DO5)
Keypad/Software
ALL
Hexadecimal
Notch Filter 1 (Resonance Suppression)
Keypad/Software
ALL
Decimal
Chapter 7 Servo Parameters
Communication
Communication
Communication
Address: 022AH
022BH
Related Section:
Table 7.B
Address: 022CH
022DH
Related Section:
Table 7.B
Address: 022EH
022FH
Related Section:
Section 6.2.5
7-57