Delta Electronics ASDA-B2 series User Manual page 160

ASDA-B2
Settings:
Please note:
For the setting of analog output voltage proportion, refer to the P1-03.
Example: P0-03 = 01 (MON1 is motor speed analog output, MON2 is motor torque
analog output)
MON1 output voltage= 8 ×
MON2 output voltage= 8 ×
P1-05 MON2 Analog Monitor Output Proportion 2 (MON2)
Operation
Interface:
Default: 100
Control
Mode:
Unit: % (full scale)
Range: 0 ~ 100
Data Size: 16-bit
Display
Format:
Settings:
Please note:
For the setting of analog output voltage proportion, refer to the P1-03.
Example: P0-03 = 01 (MON1 is motor speed analog output, MON2 is motor torque
analog output)
MON1 output voltage= 8 ×
MON2 output voltage= 8 ×
Revision September 2013
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
(Max. motor speed ×
(Max. motor torque ×
Keypad/Software
ALL
Decimal
(Max. motor speed ×
(Max. motor torque ×
Chapter 6 Control Modes of Operation
Motor speed
P1-04
100
Motor toque
P1-05
100
Communication
Motor speed
P1-04
100
Motor toque
P1-05
100
(unit: Volts)
)
(unit: Volts)
)
Address: 010AH
010BH
Related Section:
Section 6.4.4
(unit: Volts)
)
(unit: Volts)
)
6-45