LAWO POWER CORE User Manual page 96

9.2.6 Managing Bus Assignments
Having defined Aux 1 to Aux 20, there are two ways to manage the assignments from each source. Either a
particular state can be forced or the states can be toggled. The former is ideal for static bus assignments. The
latter is ideal for operator-controlled bus assignments from a fader strip MF Key.
Forced State Bus Assign
Use the Aux Switch source parameters to force a particular state for each bus send.
Aux n Pre This control input will switch the send to Aux n to pre fader.
Aux n Post This control input will switch the send to Aux n to post fader.
Aux n Off This control input will switch the send to Aux n Off.
Toggled State Bus Assign
Use the Aux source parameters to toggle the state for each bus send.
Select Aux n This control input will assign the source to Aux n. The first press assigns the source pre-fader;
the second press is post fader; and the third press is off.
Post Only If this box is checked, then there is no pre-fader option.
96/459 Version: V6.0.0/5
9. Audio Mix Engine
POWER CORE User Manual