Table of Contents
Advertisement
18. Configuring Custom Logical Behaviour
11.
Repeat steps 4 to 10 for every function you wish to be actioned from this macro.
When you finish, you should have a list of functions programmed for the macro – for example:
The functions will be actioned in the order in which they appear.
Ø
To reorder the list:
1.
Select the macro function – e.g. Mix 1 Dim Level.
2.
Click on the Move Up or Move Down buttons on the Macro Editor Toolbar to change its position within
the list.
Ø
To delete a function:
1.
Select the macro function – e.g. Mix 1 Dim Level.
2.
Right-click and select Delete.
3.
Or, select Delete all to delete all functions from the macro.
When using either of these operations, remember to change both the Rising Edge and Falling Edge if
applicable.
POWER CORE User Manual
Version: V6.0.0/5
331/459
Advertisement
Table of Contents
