Table of Contents
Advertisement
Note that the matrix addresses can refer to an internal address, or to an address within an external matrix. To
address an external matrix, you will need to configure the TCP Link under
TCPLink" for KPF, GKPF or DKPF:
VisTool Editor Configuration
The VisTool session Station ID must be set to 1 to 4, see Session Management.
1.
Add some Buttons to a new Page.
2.
Right-click on a button, and open up the MF Key -> Screen Matrix TB branch. Select the talkback key
you wish to assign to the VisTool button:
3.
Remember to save the project and switch to Test mode to test the talkback.
258/459
15. Connecting a VisTool MK2 PC
Version: V6.0.0/5
"System -> Definition -> Param =
POWER CORE User Manual
Advertisement
Table of Contents
